Table of Contents
Advertisement
4-3. If you want to make a new registration, left-click
"register." If you want to cancel a new registration, left-
click "clear."
4-4. (If you have selected "register" • • • )
It will be added to "Change authorities of users."
4-5. (If you have selected "clear" • • • )
Clears the specified contents.
5-1. (To change the access method settings • • • )
Select the item to be changed in the "Access Mode
Setup."
• Use SSL for Web Access:
Sets the level of the encoding function (SSL).
"No SSL": Does not use the encoding function.
"Menus only": Uses the encoding function for the
menus only.
"Menus + Pictures": Uses the encoding function for
the menus and pictures.
• SSL Port Settings:
Sets the port number used for SSL communication.
• Band-Width Limit:
Controls the band width of the communication. The
available setting items are "No Limit," "30Mbps,"
"20Mbps," "10Mbps," "7.5Mbps," "5Mbps," "3Mbps,"
"2Mbps," "1Mbps," "750kbps," "500kbps,"
"300kbps," "200kbps," "100kbps."
• When you use SSL, the following message appears.
Select "Yes" and then continue the operation.
• Even if the "Use SSL for Web Access" is set to "Menus
+ Pictures," the following message may appear when
displaying live or playback picture. It appears because
the communication without encoding is used to
download the ActiveX Control for displaying the
picture.
This message appears every time live or playback
picture is displayed. Select "Yes" when displaying the
live or playback picture.
In this case, the key-shaped icon which shows the
encode communication of the browser is not
displayed, however, communications of both of the
menu and picture are carried out with encoded.
5-2. Set the desired setting in "New Settings" and then
select "change" and left-click.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Communications by Web Browser
• Recorder Title & Camera Titles
This is the screen for setting or changing the recorder and
the camera titles.
1.
Select "Recorder Title & Camera Titles" and left-click.
• The "[Recorder Title & Camera Titles]" screen
appears.
2.
Enter the desired recorder or camera title to "New Text."
• The recorder and the camera titles currently set are
shown in the "Current Text."
3.
Select "change" and left-click.
• E-mail Setup
This is the screen for setting the information related to the
e-mail server or sender, and for setting the e-mail address
of the receiver.
1.
Select "E-mail Setup" and left-click.
• The "[E-mail Setup]" screen appears.
29
Advertisement
Table of Contents
