Related Manuals for Samsung VC-8828E
Summary of Contents for Samsung VC-8828E
-
Page 1: Operating Instructions
DJ68-00104A 10/18/01 11:53 AM Page 1 Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully. -
Page 2: Important Safeguards
DJ68-00104A 10/18/01 11:53 AM Page 2 FEATURES Features include indicator and automatic cord rewind. NOTE : Not all models have the same features. IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity sup- ply is the same as that indicated on the rating plate on the bottom of the cleaner. -
Page 3: Identifications Of Parts
DJ68-00104A 10/18/01 11:53 AM Page 3 IDENTIFICATIONS OF PARTS HOSE * REMOTE POWER CONTROL * (REMOTE CONTROL TYPE ONLY) HANDLE * SUCTION REGULATOR * AUTO BUTTON * TUBE * POWER CONTROL SWITCH * CORD REWIND BUTTON TRANSPARENT TUBE * ON/OFF BUTTON TOOL STORAGE COVER BUTTON FOR SUCTION HOSE REMOVAL... - Page 4 DJ68-00104A 10/18/01 11:53 AM Page 4 ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 2) Adjust the suction tube(depending on model). EXTENDING : Holding the narrow part of the telescopic tube with one hand, push the handle in the opposite direction with your other hand.
-
Page 5: Power Cord
DJ68-00104A 10/18/01 11:53 AM Page 5 POWER CORD 1) PULLING OUT : The power cord is long enough to drawn out for convenience. 2) REWINDING : When you have finished cleaning,discon- nect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe. -
Page 6: Using The Accessories
DJ68-00104A 10/18/01 11:53 AM Page 6 AUTO MODE (BUTTON CONTROL TYPE ONLY) If you press AUTO MODE, the power is automatically set at 1200~1300 watt. This mode reduces the suction power fluctuation which is caused by the fluctuation of airflow quantity to the motor. For example, when dust bag is full, the quantity of air to the motor will be decreased and power will be down followingly. -
Page 7: Park Position
DJ68-00104A 10/18/01 11:53 AM Page 7 PARK POSITION Located in the top rear side of the vacuum cleaner,there is a nozzle support that can be used to park the nozzle during pauses in cleaning TRANSPORTING AND STORING THE VACUUM CLEANER For easy storage and transportation, this vacuum cleaner has a clip system built into body, which will keep the wand, hose and nozzle in an upright position. -
Page 8: Dust-Full Indicator
DJ68-00104A 10/18/01 11:53 AM Page 8 NOTE : Used dust bags can be sealed by removing the film from the paper and sticking over the suction opening. FOR CLOTH FILTER BAG After using,if the cloth filter bag is full of dust, clean the cloth filter bag and use it again. DUST-FULL INDICATOR If the “Dust-Full”... - Page 9 DJ68-00104A 10/18/01 11:53 AM Page 9 OUTLET FILTER Open the dust cover and lift off the grille. For HEPA Filter Type For Micro Filter Type Grille Filter HEPA Filter Micro Filter Preliminary Filter Preliminary Filter Grasp filter and pull it out with preliminary filter. Grasp grille filter and pull it out with preliminary fil- After cleaning preliminary filter, reposition new filter ter.
- Page 10 DJ68-00104A 10/18/01 11:53 AM Page 10 USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator ➀ when cleaning carpets. Select flat surface indicator ➁...
-
Page 11: Troubleshooting
DJ68-00104A 10/18/01 11:53 AM Page 11 TROUBLE SHOOTING PROBLEM CAUSE REMEDY Motor does not start. No power supply. Check cable, plug and socket. Suction force is gradually Filter, nozzle, suction hose Remove the object. decreasing. or tube is blocked. Cord does not rewind fully. Check that the cord is not Pull the cord out 2~3m &... - Page 12 DJ68-00104A 10/18/01 11:53 AM Page 12 CODE-NO:DJ68-00104A REV(0.0)