Nstalling The Optional Ntenna; Belt Clip,; Nstalling The; Elt Clip - Kenwood TK-2200 Instruction Manual

I

NSTALLING THE

I
NSTALLING THE
Do not use glue which is designed to prevent screw loosening when
installing the belt clip, as it may cause damage to the transceiver.
Acrylic ester, which is contained in these glues, may crack the
transceiver's back panel.
O A
PTIONAL NTENNA
Screw the antenna into the connector on the
top of the transceiver by holding the antenna
at its base and turning it clockwise until secure.
Note: The antenna is neither a handle, a key
ring retainer, nor a speaker/ microphone
attachment point. Using the antenna in these
ways may damage the antenna and degrade your
transceiver s performance.
B C
ELT LIP
If necessary, attach the belt clip using
the two supplied 3 x 8 mm screws.
Note: If the belt clip is not installed, its
mounting location may get hot during
continuous transmission or when left
sitting in a hot environment.
7