Belt Clip; Nstalling The Ntenna; Nstalling The Elt Lip - Kenwood TH-255A Instruction Manual

i
nStAlling the
Screw the antenna into the connector on the top of the transceiver
by holding the antenna at its base and turning it clockwise until
secure.
Note: The antenna is neither a handle, a key ring retainer, nor a
speaker/ microphone attachment point. Using the antenna in these
ways may damage the antenna and degrade your transceiver's
performance.
i
nStAlling the
If necessary, attach the belt clip using the two supplied 3 x 4 mm
screws.
Note: If the belt clip is not installed, its mounting location may get hot
during continuous transmission or when left sitting in a hot environment.
4
A
ntennA
B c
elt lip