Connecting The Speakers - Kenwood KRF-V5090D Instruction Manual

Setting up the system

Connecting the speakers

Front Speakers
Right
FRONT
R
RED
SUB WOOFER
PRE OUT
Powered
Subwoofer
To make sure that each speaker has been connected properly, pay attention to the test tone from each speaker.
Refer to "4 Adjust the speaker volume level .".
Left
Center
Speaker
*
CENTER
+
-
L
WHITE GREEN
SPEAKERS (8
SPEAKERS (8-16Ω)
Right
Surround Speakers
Surround Back Speakers
Left Right
Power Amplifier
KRF-V6090D:
L
SURR BACK
/SURR BACK
*
L
SURR BACK
KRF-V6090D only
When using both
Surround Back Left
and Right speakers,
select "PRE OUT"
R
SURR BACK
at speaker settings.
PRE OUT
KRF-V6090D
SURROUND
SURROUND
BACK
+
-
R L
GRAY BLUE BROWN
Left
Surround
Back Speaker
^
KRF-V6090D
Surround Back Speaker
Power Amplifier
L
SURR BACK
/SURR BACK
R
SURR BACK
PRE OUT
^
When connecting a single Sur-
round Back speaker through a
power amplifier to PRE OUT
jack, connect it as above and
select "SPEAKER" at speaker
settings.
KRF-V5090D
SURROUND
R L
GRAY BLUE
SPEAKERS (8-16Ω)
When connecting a Surround
Back speaker to this terminal,
select "SPEAKER" at speaker
^
settings.
^
+
-
13
EN