Kenwood KRF-V5020 Instruction Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Stereo Receiver
  5. KRF-V5020
  6. Instruction manual

Kenwood KRF-V5020 Instruction Manual

Kenwood audio video surround receiver instruction manual
Hide thumbs Also See for KRF-V5020:
Table of Contents

Advertisement

Quick Links

AUDIO VIDEO SURROUND RECEIVER
KRF-V7020
KRF-V6020
KRF-V5020
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is for some models.
Model availability and features (functions) may differ depending on the country and sales area.
About the supplied remote control (RC-R0508) . . .
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain a
proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
B60-4155-00 02 MA (T,E2,Q)
OC
9809
KRF-V7020/V6020/V5020 (En/T)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KRF-V5020 and is the answer not in the manual?

Questions and answers

Related Manuals for Kenwood KRF-V5020

Summary of Contents for Kenwood KRF-V5020

  • Page 1: Quick Start Guide

    AUDIO VIDEO SURROUND RECEIVER KRF-V7020 KRF-V6020 KRF-V5020 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control (RC-R0508) . . .

  • Page 2: Getting Started

    AM loop antenna (1) : Neutral : Live For KRF-V7020, KRF-V6020 For KRF-V5020 Cleaning Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. Do not use contact cleaners because it could cause a malfunction.

  • Page 3: Table Of Contents

    Contents Caution : Read the pages marked safe operation. Getting started ... 2 Before applying the power ... 2 Safety precautions ... 2 Unpacking ... 2 How to use this manual ... 4 Special features ... 4 Names and functions of parts ... 5 Setting up the system ...

  • Page 4: How To Use This Manual

    When the broadcast ends, the receiver returns to the original station. When listening to KENWOOD source components connected with system control cords, the input selector on the receiver automatically switches to the tuner when a program you desire is broadcast.

  • Page 5: Names And Functions Of Parts

    Use for headphone listening. ! SPEAKERS A key Use to turn speaker system A on and off. SPEAKERS key (KRF-V5020) Use to turn the speakers on and off. @ SPEAKERS B key Use to turn speaker system B on and off.
  • Page 6 KENWOOD audio component. If you connect audio components from KENWOOD and other makers to the MD/ TAPE or CD jacks, you can set the remote control to operate these components by registering the appropriate setup code at the respective input.

  • Page 7: Setup Code Chart

    DVD player from KENWOOD. Keys 3, 4, 5, 9 and ! are given the following functions during the DVD player control operation.

  • Page 8: Setting Up The System

    Setting up the system Make connections as shown below. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.

  • Page 9: Connecting Video Components

    Connecting video components VIDEO 1 VIDEO 2 WOOFER CENTER MONITOR REC OUT PLAY IN PLAY IN FRONT SURROUND VIDEO 2 VIDEO 2 / MONITOR VIDEO 1 DVD 6CH. INPUT VIDEO OUT VIDEO IN Monitor TV Video Inputs (Yellow RCA pin cord) VIDEO IN DVD player or LD player Video deck...

  • Page 10: Connecting The System Control

    • Once you finish making the system connections, be sure to register the appropriate setup code for each component. • If you own remote controllable KENWOOD audio components that are not compatible with system control (or cannot be combined with your...

  • Page 11: Connecting The Speakers

    • Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker. • To use the PRE OUT jacks, press the SPEAKERS A key to the on position (the SPEAKERS key in the case of the KRF-V5020). Left Setting up the system KRF-V7020/V6020/V5020 (En/T) 2 Push lever.

  • Page 12: Preparing The Remote Control (Rc-R0508)

    Speaker placement Center speaker Subwoofer Front speaker Surround speaker Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes. Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion.

  • Page 13: Preparing The Remote Control (Rc-R0710)

    Preparing the remote control (RC-R0710) Loading the batteries 2 Insert the batteries. 1 Remove the cover. 3 Close the cover. • Insert two AA-size (R6) batteries as indicated by the polarity mark- ings. Operation When the STANDBY indicator is lit, the power turns ON when you press the POWER key on the remote control.

  • Page 14: Normal Playback

    • Activating a surround mode or selecting “DVD 6ch” as the input source causes speaker system A to be selected automatically. On the KRF-V5020, press the SPEAKERS key to switch the speak- ers on and off. Models other than KRF-V5020...

  • Page 15: Listening To A Source Component

    Press the BASS BOOST key again. Normal playback KRF-V7020/V6020/V5020 (En/T) SOURCE DIRECT VOLUME CONTROL BASS BOOST SOUND MULTI CONTROL SPEAKERS A/B SPEAKERS, MUTE (KRF-V5020) VOLUME MUTE SOUND MUTE MULTI CONTROL RC-R0508 RC-R0710 (Press the SOUND key once.) (Press the SOUND key twice.)

  • Page 16: Recording

    MUTE lets you mute the sound of the speakers. Press the MUTE key. MUTE Blinks • On the KRF-V5020, this selection can be made using the control on the receiver as well. To cancel Press the MUTE key again so that the “MUTE” indicator goes off.

  • Page 17: Listening To Radio Broadcasts

    Listening to radio broadcasts Tuning (non-RDS) radio stations Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory, see the section entitled, "Using RDS". AUTO BAND MULTI CONTROL INPUT SELECTOR...

  • Page 18: Using The Display Key

    Using the DISPLAY key DISPLAY RC-R0710 Pressing the DISPLAY key changes the contents of the display. Each press switches the display mode as follows: 1 PS (Program Service name) display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service name) display: The station name is displayed automatically when an RDS broad- cast is received, If no PS data was sent, “NO PS”...

  • Page 19: Presetting Radio Stations Manually

    Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. “Presetting RDS stations (RDS AUTO MEMORY)”.

  • Page 20: Tuning By Program Type (Pty Search)

    Tuning by program type (PTY search) This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search.
  • Page 21 Complete steps 1~3 of "Presetting RDS stations (RDS AUTO MEMORY)". Skip this step if you have already completed the RDS AUTO MEMORY procedure. • The EON function will not work if all 30 FM preset stations were stored manually using the procedure shown in “Presetting radio stations manually”.

  • Page 22: Ambience Effects

    Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.

  • Page 23: Surround Play

    Select “DVD 6ch” as the input source. • If speaker system B is on when “DVD 6ch” is selected as the input source, it switches off and speaker system A turns on automatically (models other than KRF-V5020). Start playback of the DVD software. Adjust the volume.

  • Page 24: Convenient Functions

    Convenient functions DISPLAY SOUND VOLUME MULTI CONTROL TUNING/SKIP SUBWOOFER SOUND RC-R0508 Adjusting the sound You can make further adjustments to the sound while listening to playback in the surround mode. 1 Press the SOUND key to select the item you want to adjust. Each press switches the selection as listed below.

  • Page 25: In Case Of Difficulty

    In case of difficulty Resetting the Microcomputer If the microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the micro- computer and return the unit to its normal operating condition.

  • Page 26: Remote Control Unit

    Remote control unit Symptom Remote control operation is not possible. Memory back up function Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet or the main power switch is turned off for approximately 3 days. •...

  • Page 27: Specifications

    TREBLE ... ±10 dB (at 10 kHz) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

  • Page 28: For Your Records

    For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.

This manual is also suitable for:

Krf-v6020Krf-v7020

Table of Contents

Save PDF