Sharp Aquos AN-ACS1U Operation Manual page 14

Installing the unit
Positioning the unit in the room
Choose the installation location of the unit so that
there is enough room to position the TV, media player,
or other components and to make the necessary
connections.
Caution:
• Installation should be performed by at least two people.
When moving the unit, take care to keep it level. Otherwise
the top glass cover or glass shelf may fall off, and there is a
risk of damage and injury.
Installing a TV, media player, or similar
Place the TV in the center of the unit.
Top glass cover load carrying capacity : approx. 80 kg (176 lbs.)
Glass shelf load carrying capacity
Cable clamps
Cables connected to the amplifi er section on the rear of the unit can be neatly organized with the supplied cable clamps. Use
these as required.
(1) Attach cable clamp to the unit
12
: approx. 25 kg (55 lbs.)
Peel off cover
Adhesive
and stick to
face
the unit
Ensure that there is a Ensure that there is a
clearance of at least clearance of at least
10 cm (4 in.) to the 10 cm (4 in.) to the
rear wall. rear wall.
(2) Fasten cable(s)
Cable(s)