Troubleshooting - Samsung GN642FFXD Installation And User Manual

Troubleshooting

■ Repairs to the gas and electrical components of this appliance must only be carried out by
a suitably qualified and competent person to ensure safety.
■ However, some minor problems can be resolved as follows :
Problem
Not ignited
Badly ignited
Noise made when
combusted and ignited
Fire off while using
Yellow Flame
Unstable Flame
Gas Smell
■ If problem is not solved, please contact the SamSung customer care
center.
Probable cause
No Spark.
The burner lid is badly assembled.
The middle valve is closed.
The middle valve is incompletely
opened.
The burner lid is badly assembled.
The ignition plug is contaminated
with alien substance.
The burners are wet.
The holes in the flame spreader
are clogged.
The burner lid is badly assembled.
The flame supervision device is
contaminated with alien substance.
The holes in the flame spreader
are clogged.
Different gas is used.
The burner lid is badly assembled.
A gas tap has been left on.
There may be a leak between
the coupling and the gas bottle.
16
Solution
Check the electricity supply
Assemble the lid correctly.
Open the middle valve
completely.
Open the middle valve
completely.
Assemble the lid correctly.
Wipe such alien substance with
dried clothing.
Dry the burners lids carefully.
Clean the flame spreader.
Assemble the burner lid
correctly.
Clean the flame supervision
device.
Clean the flame spreader.
Check the gas used.
Assemble the burner lid
correctly.
Check to see if any gas taps are
on.
Make sure that the connection is
airtight.