Connecting To A Video Monitor Or Projector; S Video Cable - Canon DZ-3600U User Manual

Connecting to a Video Monitor or
Projector
Use an S video cable or BNC video cable to connect the DZ-3600U to a video
monitor or projector.

S Video Cable

90
••• Note •••
• The S video and BNC video cables mentioned here are sold separately. Obtain
a cable long enough to reach between the devices at the site in which they
will be used.
• Standard television sets may be used as video monitors if they are equipped
with a video in jack.
1.
Ensure that the main unit and
other devices are turned off.
2.
Insert the plug on one end of the
S video cable into the S video
output port on the main unit.
VIDEO S VIDEO
EXT
OUTPUT
IN 1
EXT
IN 2
S Video Cable
3.
Insert the plug on the other end of the
S video cable into the S video input
port on the video monitor or projector.
Rear Panel of the Main Unit
VIDEO S VIDEO RS-232C
USB
60/100
HandShake
Reserved
Service Mode
OFF ON
AC INLET
Video Monitor or
Projector