Forwarding/Reversing The Display To The Next Image - Canon DZ-3600U User Manual

Forwarding/Reversing the
Display to the Next Image
When you are displaying an image in still mode, you can forward or reverse
the display to the next image. In preview mode, Presentation Software auto-
matically switches into still mode to perform this procedure.
In preview mode, only the [REV] button on the remote control and (
button on the toolbar are enabled for this command.
••• Note •••
• The image number of the currently displayed image is shown in the status
bar as XXX of YYY, where the Xs represent the number of the current image
and the Ys represent the total number of images captured.
Procedure with the Remote Control
To Reverse the
Display to the
Previous
Image
Press the [REV] button.
• The image immediately
• In preview mode,
Procedure with the Control Panel
This command cannot be executed from the control panel.
prior to the currently
displayed image will
display.
Presentation Software will
switch into still mode and
display the last captured
image.
Preview
Mode
To Forward the
Display to the
Next Image
Press the [FWD] button.
• The image immediately
after the currently
displayed image will
display.
CAPTURE PREVIEW
RESOLUTION
ZOOM
W T
LIGHTS
BRIGHTNESS
– +
COLOR
FOCUS
AUTO NEAR FAR
APP REV FWD
Still
Mode
)
3
59