Table of Contents
Advertisement
Important Instructions for the Remote Control
Aim the Remote Control at the Camera Head
Check the Battery Charge Prior to Use
24
The remote control sensor (the component that receives the infrared
signals from the remote control) is located on the camera head. You must
aim the remote control at the camera head for it to be effective. Pointing
it at the monitor or screen on which images are being displayed will not
work.
Even if people understand this intellectually, once they get up in front of
a real audience, many end up pointing the remote control at the screen
and clicking with all their might. We highly recommend that you plan an
on-site rehearsal before starting a presentation.
••• Note •••
• The effective range of the remote control from the remote control sensor is
approximately 16 ft. (5 m) at 120 degrees horizontally and 30 degrees
vertically.
The cause of a remote control not responding at all during a presentation
is generally an insufficient battery charge. Remember to always check the
battery charge before you need the remote control. Keep an extra set of
batteries handy if you are uncertain about the remaining charge. See
Changing the Remote Control Batteries (p. 109) for instructions.
Remote Control Sensor
Advertisement
Table of Contents
Troubleshooting
