Table of Contents
Advertisement
Shooting Negatives
To view negative films, turn on the backlight and switch to negative mode.
Ensure that the backlight is lit (P.77).
Procedure with the Remote Control
This function cannot be controlled with the remote control.
Procedure with the Control Panel
POWER
CAPTURE RESOLUTION PREVIEW
Procedures Required for showing Negative Films
1. Press the [NEGA] button and then place the negative film strip in
2. Zoom up on the desired frame until it fills the window.
3. Press the white balance [Auto] button on the control panel.
4. Press the white balance [Auto] button again after you have
Procedure with a Computer
This function cannot be controlled from a computer.
WHITE BALANCE
NEGA
DETAIL
AUTO
MANUAL
RED
BLUE
SOFT
HARD
To Switch to Negative
Mode
Press the [NEGA] button.
• The mode will switch between the positive
and negative mode each time the button is
pressed.
• The indicator will light up in negative mode.
the center of the backlit object stage.
The auto indicator will shut off.
finished viewing the frame.
The auto indicator will light and the auto white balance function will
be reactivated.
Preview
Mode
3
79
Advertisement
Table of Contents
Troubleshooting
