Depression On The Leading Edge Is Left; The Printer Does Not Go On; Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets - Canon imagePROGRAF iPF6100 User Manual

Other problems

Depression on the leading edge is left

Keeping a roll in the printer for a long time without
printing on it may leave a depression on the leading
edge.
Roller marks are left across the trailing edge of paper
A document was removed after printing from
the Front Paper Feed Slot without pressing the
Load/Eject button.

The printer does not go on

The printer is unplugged.
The specied voltage is not supplied.

Roll paper cannot be inserted into the Paper Feed Slot

The roll paper is warped.
The roll was pulled out by force when it had been
advanced before printing, and this action closed the
Paper Feed Slot .

Cannot Load Sheets

The paper source selection is incorrect.
684 Troubleshooting
Cause
Cause
Cause
Cause
Cause
Corrective Action
When printing quality is most important, we
recommend setting TrimEdge Reload to On or
Automatic so that the paper edge is automatically
cut before printing.
Corrective Action
Following the instructions, press the Load/Eject
button, remove the paper, and then press the OK
button.
Wipe away any soiling on the rollers. (→P.640)
(→P.643)
Corrective Action
Plug the power cord into the outlet, and then turn on
the printer.
Check the voltage of the outlet and breaker.
For information on the specied voltage, see
"Specications". (→P.72)
Corrective Action
Straighten out curls and reload the roll.
Hold down the Load/Eject button for a while and
reload the roll.
Corrective Action
Press the Feeder Selection button to activate the
Cut Sheet lamp .