Basic Printing Workflow; Printing Procedure; Loading And Printing On Rolls - Canon imagePROGRAF iPF6100 User Manual

Printing procedure

Basic Printing Workow
Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
•
If a sheet is loaded in the Top Paper Feed Slot, remove it before this procedure. (→P.146)
•
Before printing banners or other long documents, spread a clean cloth or paper on the oor or use the
Output Stacker to prevent the printed surface from becoming dirty from the oor after printing.
•
If you will wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and print a cut line instead. (→P.129)
1.
Turn the printer on. (→P.19)
2.
Select roll paper as the paper source. (→P.115)
80 Basic Printing Workow