The Function Number Display Switches Off - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 8 Troubleshooting

The Function Number Display switches OFF.

Has the scanner been left out of operation for a long time
after being powered on?
No
Does it remain switched off even if you turn the scanner off
then back on?
Yes
The scanner is in power saving mode.
Resume from power saving mode by one of the following methods:
Yes
Load a document in the ADF paper chute
Press any button on the operator panel
(Note that pressing the [Power] button for more than 2 seconds will turn the
power off.)
Perform scanning from an application
The scanner is operating correctly.
No
If the problem persists, check the items in
Service Provider" (page 149)
an authorized FUJITSU scanner service provider.
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
132