Chapter 7 Replacing the
Consumables
This chapter describes how to replace the consumables for the scanner.
The glasses inside the ADF become very hot
when the scanner is being used.
Before you replace the consumables, make sure
to turn off the power, unplug the power cable
and wait at least 15 minutes for the ADF glass to
cool down.
7.1 Consumables and Replacement Cycles................................................................................................... 118
7.2 Replacing the Brake Roller....................................................................................................................... 119
7.3 Replacing the Pick Roller .........................................................................................................................121
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary