Checking Dialing Line; Dialing An Overseas Number (With Pauses) - Canon 0989B001AA Advanced Manual

Advanced Fax Features
1
Advanced Copy
Features 2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
■

Checking Dialing Line

Checking dialing line function enables you to configure the
setting on whether to check for a dial tone.
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
4.
Use [ ] or [ ] to select <DIALING LINE
CHCK>, then press [OK].
5.
Use [ ] or [ ] to select <ON>, then press
[OK].
6.
Press [Stop/Reset] to return to standby
mode.
■
Dialing an Overseas Number (With
Pauses)
When you dial or register an overseas number, you may need to
insert a pause within the number.
1.
Set a document.
2.
Press [FAX].
Back Previous
3.
Adjust any necessary settings (fax
resolution, etc.) for your documents.
4.
Use the numeric keys to dial the international
access code.
For details on international access codes, contact your local
telephone company.
5.
If necessary, press [Redial/Pause] to enter a
2.5-second pause.
Ex.
= 1 2 3 P
– <P> in the fax/telephone number represents 2.5-second
pause.
– For a longer pause, press [Redial/Pause] again.
6.
Use the numeric keys to dial the country
code, the area code, and the fax/telephone
number of the recipient.
7.
Press [Start] to start scanning a document.
8.
Press [OK] to start dialing.
TOP
Next
1-6