Table of Contents
Advertisement
Advanced Fax Features
1
Receiving Features
Advanced Copy
Features
2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
You can set receive mode that suits your needs. The
machine also provides the following receiving features:
memory reception, reception restriction, and remote
reception.
■
Setting Receive Mode
To determine the right mode for you, see "Set the Machine for
Receiving Faxes (MF3240 Only)," in the Starter Guide.
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <FAX
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select <RX SETTINGS>,
then press [OK].
4.
Use [
] or [
] to select <RX MODE>,
then press [OK].
Back
Previous
5.
Use [
] or [
] to select the desired
receive mode, then press [OK].
<FaxOnly>: Answers all calls as faxes and disconnects voice
calls.
<AnsMode>: Receives faxes automatically and records voice
messages.
<NET SWITCH>: Distinguishes between fax and voice calls.
<FaxTel>: Switches between fax and voice calls automatically.
For optional settings, see "FaxTel: Optional Settings," on p. 1-8.
<MANUAL>: Does not answer any calls. You have to manually
receive faxes.
NOTE
– For <FaxTel> or <MANUAL>, make sure an external telephone
is connected to the machine.
– For <AnsMode>, make sure an answering machine is
connected to the machine.
– The <NET SWITCH> mode is available for certain countries
only and requires subscription to a network switch service.
6.
Press [Stop/Reset] to return to standby
mode.
TOP
Next
1-7
Advertisement
Chapters
Table of Contents
