When Mounting The Camera At Upright Position - Canon VB-C300 Start Manual

Vb-c300 start guide

Hide thumbs Also See for VB-C300:

Table of Contents

Setting Up the Camera

When Mounting the Camera at Upright Position

● Observe the precautions in "Before Setting Up the Camera" (→ P.2-14) and follow

them before mounting the camera.

Note

● The shooting position of the VB-C300 is set on the assumption that the camera is

mounted at the inverted position. To reverse the camera video image upside down,

see "Setting Image Size, Quality and Camera Control (Video and Camera)" in the

Operation Guide (→ dOperation Guide P.1-8).

Mounting the Camera at a Flat Location

Attach the Rubber Feet to the camera.

Using a Tripod

The screw hole for mounting a tripod is on the bottom of the VB-C300 toward the center.

● Do not overtighten the mounting screw.

If excessive force is used to tighten the mounting

Note

screw, camera head movement may be impeded,

or other malfunctions may result.

● Always use a tripod mounting screw that is less

than 5.5 mm (0.22 in.) in length. The use of screws

5.5 mm (0.22 in.) long or longer could damage the

camera. Also, the tripod seat used should be at

least 30 mm (1.18 in.) in diameter.

2-18

Place the VB-C300 at a flat and stable location.

(1.18inch)

5.5mm

30mm

(0.22inch)

or shorter

or wider

Tripod

mounting

screw

Table of Contents