Installing In The Upright Position - Canon VB-C60 Start Manual

Hide thumbs Also See for VB-C60:

Table of Contents

Step 4 Install the Camera

Installing in the upright position

Note

For this camera, the image position is set by assuming on-the ceiling installation. To reverse

the video upside down, change the direction under "Mounting Method" in the "Camera" setting

group on the Setting Page. See "Installation Conditions" ( Operation Guide).

Installing on a Flat Surface

Install the rubber feet.

Using a Tripod

Screw holes are provided at the bottom of the camera for installing a tripod.

30 mm

(1.18 inch)

or wider

Note

Be sure to use a tripod whose mounting screws are shorter than 5.5 mm. If a tripod whose

mounting screws are 5.5 mm or longer is used, the camera may be damaged. Also, use a

tripod base with a diameter of 30 mm or more.

2-16

Use the camera by placing it on a flat, stable surface.

5.5 mm

(0.22 inch)

or shorter

Tripod

mounting

screw

Table of Contents