Table of Contents
Advertisement
6.14 SELECT SYSTEM LINE BREAK TIME RANGE FOR INTERNAL FLASH RECOGNITION
Format:
* 81 m #
m = 1 = line break time of 40mS to 550mS
m = 2 = line break time of 40mS to 750mS
m = 3 = line break time of 40mS to 1000mS (Default Setting)
m = 4 = line break time of 40mS to 1200mS
m = 5 = line break time of 40mS to 1500mS
m = 6 = line break time of 40mS to 2000mS
Description: When the user presses the <FLASH KEY> or taps the Hook Switch, the telephone
generates a line break. If the telephone-generated line break time is less or equal to
the selected system line break time range, then it is recognised as an internal flash.
If the telephone generated line break time is greater than the selected system line
break time range, then it is recognised as an internal line release (same as going
On-Hook).
Example: Assign system line break time detection range from 40mS to 1200mS
6.15 RESTORE SYSTEM DATA DEFAULT SETTINGS
Format: * 6 000
Description: This will re-initialise the programmed system data. When all the programmed data
is cleared, the system resets and restarts using the default settings.
Default Values:
Password-----------------------------------0000 (once changed, it can not be reset to 0000)
Attendant Mode---------------------------Operator Attendant Mode
Operator No.1 ---------------------------- Extension 802
Operator No.2 ---------------------------- Extension 803
Ringing Extensions --------------------- 801 ~ 804
Class of Extension ---------------------- n = 2
Extension numbers --------------------- 801 ~ 808
Outbound access------------------------ Dial 9 or press <FLASH KEY> or tap the Hook Switch
37
.
Advertisement
Table of Contents
