6.2
PASSWORD
6.2.1
INPUT THE SYSTEM PASSWORD
Format:
* 01 abcd #
abcd = system password
Description: Allows you to input the system password to enter into system programming mode
If you have entered into programming mode by system password, you should not hang
up extension 801 until all the desired system settings have been modified; otherwise you
will have to re-enter the system password to re-enter programming mode.
6.2.2
CHANGE THE SYSTEM PASSWORD
Format:
* 02 ABCD #
ABCD = new system password (Default password = 0000)
Description: Changes the old system password to a new system password
Example: The default system password is 0000. We suggest that you change the default
system password before using the PABX.
If you want to change the system password to 5678, you should input *01 0000 # to
enter the system, then input *02 5678 # to change the system password to 5678
Suppose you need to change the system password again to 1111, you should input
*01 5678 # to enter the system, then input *02 1111 # to change the system
password to 1111
6.3
ATTENDANT MODE ASSIGNMENT
6.3.1
OPERATOR ATTENDANT MODE ASSIGNMENT (DEFAULT SETTING)
Format:
* 2 1 #
Description: In this mode, certain extensions will ring (see paragraph 6.6) when an incoming call
is received. Pick up any ringing extension to answer the call.
24