3.
A pop-up window is displayed:
Select "
ost
If no device has been configured at this address before, choose connection addresses as
appropriate.
4.
The following details are displayed:
Check the following values and change them if necessary:
• BLOCK Size = 0
• Use EXTENDED file marks = "no"
• RESERVE/RELEASE support = "yes"
• Set maximum delay for the READ/WRITE command = 1200
Click on the "DO" button to apply the changes.
26
IBM (AIX) servers and workstations
" or "
Other SCSI tape drive
" as the tape drive you wish to change.