Saving And Recalling Custom Panel Setups; Registration Memory; Saving Your Panel Setups To A Registration Memory - Yamaha Tyros2 Owner's Manual

Quick Guide

Saving and Recalling Custom Panel Setups

NOTE
• For a list of Registration Memory setup parameters, refer to the separate Data List.

Saving your Panel Setups to a Registration Memory

1
Set up the panel controls (such as voice, style, effects,
and so on) as desired.
2
Press the [MEMORY] button in the REGISTRATION
MEMORY section.
You can determine whether the
settings are to be memorized (on)
or not (off) for each parameter
group. Enter checkmarks only to
those parameter groups you want
to be memorized.
3
Press the numbered [REGISTRATION MEMORY] button to which
you wish to memorize the panel setup.
The memorized button becomes red.
4
Memorize various panel setups to other buttons by repeating steps
#1–#3.
The button to which the panel setup has just been memorized lights red and the
button to which the panel setup was previously memorized lights green—the lit
buttons indicating that each contains panel setup data.
5
Referring to the instructions on page 53, save the eight memorized
buttons as a single Registration Memory bank to the User drive
(page 29).
52
Tyros2 Owner's Manual

—Registration Memory

Since the Tyros2 is such a sophisticated instrument
with such a variety of controls and functions—voice,
style, and effect settings, just to name a few—it may
be difficult to get a handle on them all. This is where
the convenient Registration Memory can help. It
allows you to save virtually all panel settings to a Reg-
istration Memory setting, and then instantly recall
your custom panel settings by pressing a single but-
ton.
• When a checkmark is entered to the SONG box, the
Moves the cursor to the parameter group. You can
move the cursor by using the [DATA ENTRY] dial.
Reference on page 173
NOTE
current path (currently selected folder) of the song
file can be memorized to Registration Memory.
Cancels the regis-
tration and returns
to the previous dis-
play.
Enters a checkmark to
the selected box (param-
eter group).
Removes the checkmark
from the selected box
(parameter group).
CAUTION
• Any panel setup previously
memorized to the selected
REGISTRATION MEMORY but-
ton (indicator is green or red)
will be erased and replaced by
the new settings.
NOTE
• To delete all eight current panel
setups, turn the [POWER] button
ON while holding the B6 key
(right-most B key on the key-
board).