Yamaha Tyros2 Owner's Manual page 145

5
Record the specific part of the audio song using the one of the
methods below.
● Manual
Press the HARD DISK RECORDER [REC] button and press the [PLAY/PAUSE]
button to engage the record mode, then press the [REC] and [PLAY/PAUSE] buttons
simultaneously to actually record. To stop recording, press the HARD DISK
RECORDER [STOP] button. Pressing the HARD DISK RECORDER [PLAY/
PAUSE] button during recording pauses the recording.
● Pedal
Press the HARD DISK RECORDER [REC] button and press the [PLAY/PAUSE]
button to engage the record mode, then press and hold the footswitch. The point at
which you press the footswitch is the punch in point and the point at which you
release the pedal is the punch out point.
● Auto
Press the HARD DISK RECORDER [REC] button and press the [PLAY/PAUSE]
button. Recording automatically starts and stops at the specified point in "Specify the
recording range in AUTO mode" above. The audio song playback automatically
stops four seconds after the punch out point.
6
Listen back to the newly edited recording. If you're satisfied with
the results, save the recording. If not, use the Undo function to
restore the original, then attempt the Punch In/Out recording again.
To save the recording, press the [SAVE] LCD button ([I] button), then press the [OK]
LCD button ([G] button).
To Undo the new recording, press the [UNDO] LCD button ([G] button).
Recording Audio with the Hard Disk Recorder
Tyros2 Owner's Manual
Reference
145