Yamaha Tyros2 Owner's Manual page 131

Example 3
To properly enter the tied notes here, keep in mind that you'll need to hold the keys down during the
entire operation until all the notes are entered.
1
Set the parameters below in sequence.
2
Enter the note C3, as specified in the example.
While holding the key C3, press the 1/8 note LCD button.
3
Enter the note E3.
While holding the keys C3 and E3, press the 1/8 note LCD button.
4
Enter the note G3.
While holding the keys C3, E3 and G3, press the 1/8 note LCD button.
Determines the velocity (loudness) of the note to be
entered. Here, we'll select "ff," as specified in the
example.
Sets the Gate Time, or the length of the note (as a
percentage). Here, we'll select "Normal," as speci-
fied in the example.
Use these buttons to set the resolution of the next
note. Here, we'll set the resolution to an 1/8 note, as
specified in the example.
Do not release C3 yet. Keep holding the
note as you execute the following steps.
Do not release C3 and E3 yet. Keep holding
the notes as you execute the following steps.
Do not release C3, E3 and G3 yet. Keep holding
the notes as you execute the following steps.
Reference
Song Creator (Digital Recording)
NOTE
• Since the music score displayed on the
instrument is generated from the
recorded MIDI data, it may not appear
exactly the same as shown here.
Tyros2 Owner's Manual
131