Wep Key Settings; Wlan Security Settings; Wep Security Settings - Nokia 002F581 User Manual

TX power level
•
when sending data.
Radio measurements
•
measurements.
Power saving
•
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
Options Restore
>

WLAN security settings

Select Menu Tools
>
Access points
>
an access point and
In the access point settings, select
and the desired mode.

WEP security settings

Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the required
WEP keys. When the WEP security mode is in use, and your
device receives a data packet not encrypted with the WEP
keys, the data is discarded.
In an ad-hoc network, all devices must use the same WEP
key.
118
Select WLAN security settings
— Select the power level of your device
— Enable or disable the radio
— Select whether to use the WLAN
defaults.
Settings Connection
> >
Options New access point, or select
>
Options > Edit.
WLAN security mode
and from the following:
WEP key in use
•
Authentication type
•

WEP key settings

•
WEP key settings
In an ad-hoc network, all devices must use the same WEP
key.
Select WLAN security settings
from the following:
WEP encryption
•
key length.
WEP key format
•
the WEP key data in
> WEP key — Enter the WEP key data.
•
802.1x security settings
Select 802.1x as the WLAN security mode.
802.1x authenticates and authorises devices to access a
wireless network, and prevents access if the authorisation
process fails.
Select WLAN security settings
WPA/WPA2
•
Protocol) or
device identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key
•
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.
— Select the desired WEP key.
— Select Open
— Edit the settings for the WEP key.
WEP key settings
>
— Select the desired WEP encryption
— Select whether you want to enter
ASCII or Hexadecimal
and from the following:
— Select EAP (Extensible Authentication
Pre-shared key (a secret key used for
— If you selected
— If you selected WPA/WPA2
or Shared.
and
format.
WPA/WPA2
>
Pre-
>