Internal Effects; About The Internal Effects; Using Effects Processors Via Aux Sends - Yamaha 01V96i Reference Manual

64

Internal Effects

Internal Effects
This chapter describes how to use the 01V96i's internal effects
processors.

About the Internal Effects

The 01V96i features four internal multi-effects processors.
These effects processors offer numerous types of effects,
including reverbs, delays, modulation-based effects, and
combination effects designed especially for use with sur-
round sound.
Note: When the 01V96i operates at a high sampling frequency
(88.2 kHz or 96 kHz), you can use only Effects processors 1 and 2.
Processor inputs and outputs can be patched to various
sources. For example, effects processor inputs can be fed from
the Aux Sends and output to ST IN Channels (effects
send/return). Effects processors can also be inserted into
Input Channels, Bus Outs, Aux Outs, or the Stereo Out.
Effects processors 1 through 4 create 1-in/2-out or
2-in/2-out effects.
AUX1-8
INSERT OUT
The 01V96i also features the Effects library, which contains 56
preset programs (including Add-On Effects) and 72 user pro-
grams.
01V96i—Reference Manual
1 1
EFFECT 1
2 2
1 1
EFFECT 2
2 2
1 1
EFFECT 3
2 2
1 1
EFFECT 4
2 2
Using Effects Processors
via Aux Sends
You can use effects processors via Aux Sends by patching
effects processor inputs to Aux Outs, and effects processor
outputs to ST IN Channels.
1.
Recall an effect program you wish to use.
Refer to page 76 for more information on recalling effect
programs.
2.
Press the DISPLAY ACCESS [PATCH] button
repeatedly until the Patch | Effect page
appears.
This page enables you to patch all inputs and outputs of
Effects processors 1–4.
1
This page contains the following parameters:
1
IN
These parameter boxes select the signals to be fed to the
effects processors.
2
OUT
These parameter boxes select the destination of the sig-
nals output from the effects processors.
3
button
This button recalls the FX1 Edit–FX4 Edit pages, which
enable you to adjust the effect parameters.
3 2