Yamaha 01V96i Reference Manual page 145

Dual Phaser
This is a 2-in/2-out phaser that emulates a vintage
phaser manufactured during the mid-1970s.
Parameter Range
SYNC,
RATE 1
0.067–20.000 Hz
SHAPE 1 Sine, Square
SYNC,
RATE 2
0.111–20.000 Hz
SHAPE 2 Sine, Square
DEPTH
1.00–10.00
(A/B)
FB (A/B) 0.00–10.00
SW (A/B) ON, OFF
SWEEP B LFO1, LFO2
SYNC B NORM, REV
IN MODE 1, 2, 3, 4
Description
Adjusts the modulation rate of
LFO1
Selects the waveform of LFO1
Adjusts the modulation rate of
LFO2
Selects the waveform of LFO2
Adjusts the depth of modulation
Adjusts the amount of feedback
Switches the phaser circuit
on/off
Selects the LFO for Phaser B
Selects the LFO phase for Phaser
B
Specifies the way in which the
two phasers are connected.
1: After mixing the stereo input,
the sound processed by Phaser A
is output from the left channel,
and the sound processed by
Phaser B is output from the right
channel.
2: After mixing the stereo input,
the sound processed by Phaser A
is output from the left channel,
and the sound processed by
Phaser A and then additionally
processed by Phaser B is output
from the right channel.
3: After mixing the stereo input,
the sound processed by Phaser A
and then additionally processed
by Phaser B is output from both
the left and right channels.
4: The left input channel is pro-
cessed by Phaser A and output
from the left channel, and the
right input channel is processed
by Phaser B and output from the
right channel.
145
Effects Parameters
01V96i—Reference Manual