Dimm Installation; Figure 3-5 Removing A Dimm - NEC DIRECTION L Service Manual

3-10 Option Installation
5. Store the DIMM in an antistatic bag (available at electronic supply stores) or a
cardboard box.

DIMM Installation

Use the following procedure to install a DIMM.
Remove the access cover.
1.
Locate the DIMM sockets.
2.
3. Remove any currently-installed DIMMs that are not needed. See "DIMM
Removal" in this chapter.
4. To install a DIMM, align the module with an empty socket. Make sure that the
notches on the DIMM line up with the keys in the sockets.
5. Insert the DIMM into the socket. Close the plastic clips at both ends of the
socket.

Figure 3-5 Removing a DIMM

CAUTION: Before installing a DIMM, reduce
static discharge by touching the system's metal
chassis.