Keyboard Configuration Submenu - NEC DIRECTION L Service Manual

2-12 Setup Utility
T
Floppy Disk Controller
This option configures the system's diskette drive controller. Select "Enabled"
(default) or "Disabled."
T
IDE Controller
This option configures the system's integrated IDE controller. Select from
"Primary," "Secondary," "Both" (default) or "Disabled."
To return to the Advanced Menu, press Esc.

Keyboard Configuration Submenu

This submenu is used to configure specific keyboard features. To enter the submenu,
highlight this field, then press Enter. The following options appear:
T
NumLock
This option controls whether the NumLock key on the keyboard is on or off at
boot-up. The choices are "Auto" (default), "On" or "Off."
T
Key Click
This feature enables or disables the key click option. Select "Enabled" or
"Disabled" (default).
T
Keyboard Auto-Repeat Rate
This feature selects the key repeat rate, the rate at which a key, when pressed and
held, repeats itself. The eight options range from 30 per second (default) to 2 per
second.
T
Keyboard Auto-Repeat Delay
This feature selects the delay before key repeats. The four options include from
¼ second to 1 second. The default is ½ second.
To return to the Advanced Menu, press Esc.