Viewing The Last System Crash Screen - Dell IDRAC6 User Manual

Viewing the Last System Crash Screen

NOTE:
The last crash screen feature requires the managed system with the Auto
Recovery feature configured in Server Administrator. In addition, ensure that the
Automated System Recovery feature is enabled using the iDRAC6. Navigate to the
Services page under the Network/Security tab in the Remote Access section to
enable this feature.
The Last Crash Screen page displays the most recent crash screen. The last
system crash information is saved in iDRAC6 memory and is remotely
accessible.
To view the Last Crash Screen page:
1 In the System tree, click System.
2 Click the Logs tab and then click Last Crash Screen.
The Last Crash Screen page provides the following buttons (see Table 19-9)
in the top-right corner of the screen:
Table 19-9. Last Crash Screen Page Buttons
Button
Print
Refresh
NOTE:
Due to fluctuations in the Auto Recovery timer, the Last Crash Screen may
not be captured when the System Reset Timer is set to a value less than 30 seconds.
Use Server Administrator or IT Assistant to set the System Reset Timer to at least
30 seconds and ensure that the Last Crash Screen functions properly.
See "Configuring the Managed System to Capture the Last Crash Screen" on
page 315 for additional information.
Action
Prints the Last Crash Screen page.
Reloads the Last Crash Screen page.
Recovering and Troubleshooting the Managed System
333