Dell IDRAC6 User Manual page 305

Table 17-1. LAN Parameters
Item
Domain Name
Host Name String
LAN Alert Enabled
Alert Policy Entry 1 Select Enable or Disable to activate the first alert destination.
Alert Destination 1
IPv4 Settings
IPv4
RMCP+ Encryption
Key
IP Address Source
Ethernet IP Address If the IP Address Source is set to DHCP , this field displays the
Subnet Mask
(continued)
Description
If Domain Name from DHCP is set to Off, press <Enter> to
edit the Current Domain Name text field. Press <Enter>
when you have finished editing. Press <Esc> to return to the
previous menu. The domain name must be a valid DNS
domain, for example
Press <Enter> to edit. Enter the name of the host for
Platform Event Trap (PET) alerts.
Select On to enable the PET LAN alert.
If LAN Alert Enabled is set to On, enter the IP address where
PET LAN alerts will be forwarded.
Enable or disable support for the IPv4 connection.
Select Enabled or Disabled IPv4 protocol support.
Press <Enter> to edit the value and <Esc> when finished.
The RMCP+ Encryption key is a 40-character hexadecimal
string (characters 0-9, a-f, and A-F). RMCP+ is an IPMI
extension that adds authentication and encryption to IPMI.
The default value is a string of 40 0s (zeros).
Select between DHCP and Static. When DHCP is selected,
the Ethernet IP Address, Subnet Mask, and Default Gateway
fields are obtained from a DHCP server. If no DHCP server is
found on the network, the fields are set to zeros.
When Static is selected, the Ethernet IP Address, Subnet
Mask, and Default Gateway items become editable.
IP address obtained from DHCP .
If the IP Address Source is set to Static, enter the IP address
you want to assign to the iDRAC6.
The default is 192.168.0.120.
If the IP Address Source is set to DHCP , this field displays the
subnet mask address obtained from DHCP .
If the IP Address Source is set to Static, enter the subnet mask
for the iDRAC6. The default is 255.255.255.0.
Using the iDRAC6 Configuration Utility
mycompany.com
.
305