Configuring Terminal Mode - Dell IDRAC6 User Manual

Configuring Terminal Mode

1 Expand the System tree and click Remote Access.
2 Click the Network/Security tab and then click Serial.
3 In the Serial page, click Terminal Mode Settings.
4 Configure the terminal mode settings.
See Table 5-11 for description of the terminal mode settings.
5 Click Apply Changes.
6 Click the appropriate Terminal Mode Settings page button to continue.
See Table 5-12 for description of the terminal mode settings page buttons.
Table 5-11. Terminal Mode Settings
Setting
Line Editing
Delete Control
Echo Control
Handshaking Control Enables or disables handshaking.
New Line Sequence
Input New Line
Sequence
Table 5-12. Terminal Mode Settings Page Buttons
Button
Print
Refresh
108
Advanced iDRAC6 Configuration
Description
Enables or disables line editing.
Select one of the following:
• iDRAC outputs a <bksp><sp><bksp> character
when <bksp> or <del> is received —
• iDRAC outputs a <del> character when <bksp> or
<del> is received —
Enables or disables echo.
Select None, <CR-LF>, <NULL>, <CR>, <LF-CR>,
or <LF>.
Select <CR> or <NULL>.
Description
Print the Terminal Mode Settings page.
Refresh the Terminal Mode Settings page.