Lian Li LANCOOL 216, PC-LAN216RW Manual

Product Components

1. IO ports: 1 x Hd AUDIO / Microphone Combo Jack, 2 x USB 3.0, 1 x USB 3.1 Type C, Reset Button, Power Button
2. Removable fan bracket, Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1 or 280 mm radiator x 1
3. INCL FAN 140 mm fan x 1 (200~1800 RPM / 81.30 CFM / 2.40 mm H2O), Supporting 120 mm fan x 1
4. Water Cooling Mode: Supporting 120 mm fan x 2 or 2.5" SSD x 2
   Air Cooling Mode: Supporting 240 mm radiator x 1 or 120 mm fan x 2 or 140 mm fan x 2 or 2.5" SSD x 2
5. Removable fan bracket, Supporting 120 mm fan x 3 or 140 mm fan x 2 or 160 mm fan x 2 or 360 mm radiator x 1 or 280 mm radiator x 1
6. LANCOOL 216: INCL FAN 160 mm fan x 2 (500~1680 RPM / 118.85 CFM / 3.10 mm H2O)
   LANCOOL 216 RGB: INCL FAN 160 mm ARGB fan x 2 (500~1680 RPM / 118.85 CFM / 3.10 mm H2O)
7. Removable HDD cage: Supporting 3.5" HDD x 2 + 2.5" SSD x 2
8. Supporting 2.5" SSD x 2 PSU tray,
9. Supporting ATX PSU x 1 (Removable dust filter in bottom)
10. Reversible PCIE Slots
11. Controller tray
12. LANCOOL 216: None
    LANCOOL 216 RGB: ARGB/FAN Hub (Sync Motherboard PWM Fan Header x6 / 5V ARGB Header x4)

Hardware List

*Exceeded quantity are spare parts.

Remove the Top Cover and Front Panel

No need to remove the front panel, unless replacing the I/O and the fans.

Remove the Side Panel

Peel off the protective film on both sides.

No need to remove the bottom side panel while doing installation at the main chamber.

Remove the Dust Filters

PSU Installation

Motherboard Installation

Flip the Cable Grommet Bar

Decide Where to Install the Motherboard

Water cooling mode

(Standard mode)

The stand-off bolts mount at the downward arrow position.

Fan Supports for Water Cooling Mode

Air cooling mode

The stand-off bolts mount at the upward arrow position.

Fan Supports for Air Cooling Mode

Air cooling mode installation

1. Remove the stand-off bolts from water cooling mode
   Rear fan can be removed for better installation of air cooling mode.
   
2. Rotate the I/O shield.
   
3. Fix the stand-off bolts at air cooling mode.
   The stand-off bolts mount at the upward arrow position.
   

Rear Fan Bracket Installation

Suggest install at air cooling mode.

Outlet for fan cables routing.

Horizontal graphics card installation

Vertical graphics card installation

Vertical Graphics Card Installation

Relocate front I/O

Release the I/O cables from the Velcro straps behind the MB tray beforehand.

Loose one cable at a time to release the I/O.

I/O cables route from the bottom.

Top Fan Bracket Fan Installation

Fan Exchange Installation at Front Fan Bracket

Step 1

Step 2
160 mm fan mounting points

1. Secure with thumb screws.
2. 160mm fans center alignment mounting points.
3. 160mm fans bottom alignment mounting points.
4. 160mm fans top alignment mounting points.

140 mm fan mounting points

1. Secure with thumb screws.
2. Two 140mm fans center alignment mounting points.

120 mm fan mounting points

1. Secure with thumb screws.
2. Three 120mm fans center alignment mounting points.

Step 3

Above PSU Shroud

Fan and water-cooling Installation

Fan cannot be installed when the graphics card is vertical.

240 mm radiator installation

Fan installation

Only supports 120mm fans at water-cooling mode.

2.5 SSD Installation

Only one 2.5" SSD can be installed when the graphics card is vertical.

Install the Anti-vibration rings into the tundish bracket first, and then fix the screws.

2.5 SSD Tray Installation

HDD Cage Installation

HDD Cage Mounting Position 1

HDD Cage Mounting Position 2

2.5" SSD Installation

3.5" HDD Installation

Hardware Clearance

I/O Ports Function

Cable Management

How to use the Velcro straps

Option Kits

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Lian Li LANCOOL 216, PC-LAN216RW Manual