Fujitsu ScanSnap S300 Operator's Manual page 81

- Allow automatic image rotation
When this checkbox is marked, pages scanned upside down or in the wrong
orientation are rotated and output in the right orientation.
This function detects the orientation of a document based on the text lines.
ATTENTION
Therefore, the following types of documents may not be rotated correctly:
•
Documents which have many extremely large/small characters
•
Documents on which pitches of lines or characters are extremely narrow, or
characters are overlapped
•
Documents that have many characters contacting underlines or ruled lines
•
Documents that have many photographs or figures but a few characters
•
Documents that have characters on patterned background
•
Documents that have characters printed in various directions (e.g. drawings)
•
Documents that have only capital letters
•
Handwritten documents
•
Documents that have unclear or smeared characters
*When you scan documents above, clear the checkbox.
- Set the documents with its face up
Mark the checkbox if you want to scan the
document as shown in the right figure.
Scanning starts with the last page from
bottom up. After all pages are scanned,
pages are sorted in the reverse order scanned
to save to file.
The scanning speed is slower than usual because scanned images are sorted
ATTENTION
after scanning.
4.2 Changing Scanning Settings
ScanSnap S300 Operator's Guide
4
61