Replacing The Pick Roller - Fujitsu ScanSnap S300 Operator's Manual

9.3

Replacing the Pick Roller

Replace the Pick roller following the procedure below.
Operation
1. Remove the documents on the paper chute.
2. Open the ADF while pulling the cover open lever.
ADF
Cover open lever
3. Remove the sheet guide.
Hold the pick-up tabs on the sheet guide between the thumb and index fingers, and then pull
up the sheet guide to remove.
Sheet guide
9.3 Replacing the Pick Roller
Pick-up tab
ScanSnap S300 Operator's Guide
Paper chute
Pick-up tab
195
9