Clearing Document Jams - Fujitsu ScanSnap S300 Operator's Manual

7.1

Clearing Document Jams

If a paper jam occurs during scanning, follow the procedure below to remove the jammed
document.
CAUTION
•
Open the ADF before removing the jammed document.
•
Be careful when removing the jammed document.
•
When removing the jammed document, be careful not to get neckties or necklaces
entangled in the ScanSnap.
•
The surface of the ADF glass becomes hot during operation. Take care not to get burned.
HINT
Operation
1. Remove the document on the paper chute.
2. Open the ADF while pulling the cover open lever.
Cover open lever
174
Clean the ADF by following the guidelines in
Scanner" (on page 185).
ADF
"8.2 Cleaning the Inside of the
Paper chute