Fujitsu ScanSnap S300 Operator's Manual page 139

Operation
3. Place the mouse cursor on [Scan2Print].
⇒
A description of the [Scan2Print] action is displayed.
4. When you want to change settings on the [Scan2Print] action, place the cursor on
the ( ) mark, and then click the [Setting] button
(If you do not want to change settings, go to
⇒
The following dialog box appears.
In this dialog box, you can change settings on the [Scan2Print] action as follows:
[Keep data used for printing as files] checkbox
Printed document images are saved in PDF format.
PDF files are saved in a folder specified in the [Image saving folder] drop-down
list on the
Settings] dialog box.
[Show "Print" dialog] checkbox
Before documents are printed, the print setup dialog box is displayed.
5. Click the [OK] button to close the [Scan2Print - Options] dialog box.
5.4 Using the ScanSnap as a Copy Machine
Step
"[Save] tab" (page 54) of the [ScanSnap Manager - Scan and Save
ScanSnap S300 Operator's Guide
.
6.)
5
119