Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Elegoo Mars 5
Summary of Contents for Elegoo Mars 5
- Page 1 ●Mars 5 3D Printer User Manual...
- Page 2 After receiving the product, please confirm whether the equipment is intact and the accessories are complete. If there is any damage or missing, please timely contact us at 3dp@elegoo.com. (To ensure the performance of each product, each product will undergo strict printing tests before leaving the factory. There may be some...
- Page 3 ●Please use 95% (or higher) ethyl alcohol or isopropyl alcohol to wash your model unless you are using water washable resin. ●If you have any problems with the printer, please contact us at 3dp@elegoo.com. Please do not disassemble or modify ELEGOO 3D printers by yourself, otherwise, the warranty will expire, and damage caused by personal...
-
Page 4: Table Of Contents
Contents Packing List Printer Introduction 3D Printer Tech Specs Device Self-Check Test Printing Software Installation and Setup Machine Maintenance Warranty Statement... -
Page 5: Packing List
Packing List Build Plate Resin Tank USB Flash Disk Mask Gloves Funnel Backup Screws User Manual Adapter Mars 5 3D Printer Tool Kit Scraper... -
Page 6: Printer Introduction
Printer Introduction Handle Build Plate LCD Display Screen Resin Tank Touch Screen Z Axis Screw Knob DC Socket Switch USB Interface... - Page 7 Printer Introduction Anti-UV Cover Extension Port (Connect peripherals, such as a mini heater and other compatible printer accessories)
-
Page 8: 3D Printer Tech Specs
3D Printer Tech Specs Printing Parameter Hardware Specification ●System: EL3D-3.0.1 ●Dimension: 230mm(L)*230mm(W)*433.5mm(H) ●Operation: 3.5-inch Resistive Touch Screen ●Build Volume: 143.43mm(L)*89.6mm(W)*150mm(H) ●Slicer Software: Voxeldance Tango & CHITUBOX ●Package Size: 530mm(L)*325mm(W)*295mm(H) ●Connectivity: USB Interface ●Gross Weight: 8.6KG ●Net Weight: 6.6KG Printing Specification ●Technology: MSLA Stereolithography ●Light Source: COB Light Source (wavelength 405nm) ●XY Resolution: 35*35μm (4098*2560) -
Page 9: Device Self-Check
Device Self-Check Note: Upon startup, the printer conducts a self-check on key hardware components to prevent any printing failures due to hardware malfunctions. Please refer to the error prompts on the machine to troubleshoot the printer. Do not touch the printer during the self-check process. (See Picture 1) Re-detection Accumulated release film usage... -
Page 10: Test Printing
After printing is completed, wait until the resin on the build plate stops dripping, then lift the handle to take out the build plate, and use a scraper to remove the model. You can use ELEGOO's cleaning and curing machine to post-process the model. -
Page 11: Software Installation And Setup
Software Installation and Setup The printer can install and use the Voxeldance Tango or CHITUBOX slicing software in the USB flash drive, taking Voxeldance Tango as an example. 1. Install Voxeldance Tango Select from the USB flash drive or go to Voxeldance's official website (www.voxeldance.com/Tango) to download the right slicing software version and install it on your computer. - Page 12 2) Scroll the mouse wheel to zoom in or zoom out the model. 3) Long press the right mouse button to view the different perspectives of the model. 3. Voxeldance Tango Setting 3.1 Click "Platform Definitions" and select ELEGOO Mars 5 as the default printer (See Picture 5) (Picture5) (Picture6) 3.2 Build Volume...
- Page 13 Software Installation and Setup 3.3 Resin Parameter (See Picture 7) Resin Density: 1.1g/ml Resin Cost: You can input the real price of the resin you purchased, and the slicing software can calculate the resin costs for each model you print. (Picture7) 3.4 Parameters (See Picture 7) Layer Height:...
- Page 14 Software Installation and Setup Wait After Cure: The time difference between the end of the exposure and the start of the build platform to leave the exposure surface, the default setting is 0 seconds. Wait Before Cure: After the build platform moves to the printing surface, the time difference between the build platform starting to stationary and starting to exposure, the default setting is 0.5 seconds.
-
Page 15: Faq
Build plate or resin tank is not fastened. 3. Abnormal Screen Exposure If your printer doesn't work please contact us at 3dp@elegoo.com. and as to better help and solve problems for you, please add your order ID in your email. - Page 16 6. Why do I get resin insufficient or exceeding maximum volume error when starting a print At the beginning of the print, the mechanical sensor detects the remaining resin in the tank. To ensure smooth printing, the resin level must be above one-third of the tank volume. Additionally, the resin level should not exceed the MAX line to prevent leakage.
-
Page 17: Machine Maintenance
Machine Maintenance ●Please do not use sharp or pointy tools to scrape the resin tank to avoid damaging the release liner film. ●Please clean up the resin tank before changing the resin to another color. ●Before and after printing, clean the build plate with paper towels or alcohol to ensure that there are no bumps or burrs on the build plate. -
Page 18: Warranty Statement
Warranty Statement ●From the date of purchase, ELEGOO printer is entitled to a 1-year free warranty service, except for consumables of the LCD screen and the release film. ●The LCD screen enjoys a 6-month free warranty service. ●The free warranty does NOT include problems caused by self-disassembly and improper use, and wear and... - Page 19 ●Telephone--0755-21005141 ●Mailbox--3dp@elegoo.com ●Website--www.ELEGOO.com ●Address--101, No.30 Dahe Industrial Park, Guancheng Community, Guanhu Street, Longhua District, Shenzhen, China...
Need help?
Do you have a question about the Mars 5 and is the answer not in the manual?
Questions and answers