Manufacturing Characteristics - Electrolux 6 Series Service Manual

3.3 Manufacturing characteristics

1. Frontal piece
2. Front air conduit
3. Drum
4. Rear panel
5. Rear air conduit
6. Sides
7. Worktop
8. Crossbars
9. Condensation water tank
10. Base (upper part)
The front panel and sides are made of painted sheet metal, whereas the rear panel is in zinc-coated sheet
metal. These parts are fastened using self-tapping screws and are connected to the base.
The shaped base, in carboran, supports all the main elements.
Technical Support - A.D.L.
11. Base (lower part)
12. Capacitor
13. Steamer
14. Auxiliary capacitor
15. Rotating compressor
16. Compressor fan
17. Motor
18. Air circulation fan
19. Level sensor
20. Pump
10/66
21. Pump compartment lid
22. Drum rollers
23. Fluff filter
24. Fluff filter base
25. Fluff filter access door
26. Base board
27. Door
28. Control panel with control
board
29. Main board
30. Motor control board
599 74 32-54 Rev.01