Terminals - Mitsubishi Electric 800 Series Instruction Manual

NOTE
• The motor temperature detection is valid for the first motor. When applying the second motor (RT signal is ON), temperature
detection is not performed.
• To detect temperature with FR-A8AZ, be sure to use the SF-V5RUT/A, a dedicated motor with thermistor.
6.2

Terminals

SW2
Terminal symbol Terminal name
TH1 Thermistor input 1
TH2 Thermistor input 2
Switch for thermistor
SW2
calibration
38
MOTOR THERMISTOR INTERFACE
Input the motor side thermistor output signal.
When calibrating at installation, change the switch to place the inverter in
calibration status.
Description