JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Step 4 (Optional) If a smoke sensor with the BOM number BRJ-301ALG is configured,
insert the cables into the cable tray through the cable hole in the base after
connecting the cables.
Figure 6-39 Connecting cables of the BRJ-301ALG smoke sensor
Step 5 Insert the smoke sensor into the base and turn it clockwise until it locks in.
----End
Power-On
Perform operations in the reverse order of the power-off operations.
6.8.12 (Optional) Replacing an Alarm Beacon
Context
If an alarm beacon is found damaged during maintenance, power it off and
replace it.
Procedure
Step 1 Remove the cable from the alarm beacon and record the position.
Step 2 Remove the faulty alarm beacon.
Issue 02 (2023-09-30)
Copyright © Huawei Technologies Co., Ltd.
6 System Maintenance
171