Personal Safety - Huawei JUPITER-3000K-H1 Smart User Manual

JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
●
●
●
●
●

1.1 Personal Safety

Ensure that power is off during installation. Do not install or remove a cable with
power on. Transient contact between the core of the cable and the conductor will
cause electric arcs, sparks, fire, or explosion, which may result in personal injury.
Non-standard and improper operations on the energized equipment may cause
fire, electric shocks, or explosion, resulting in property damage, personal injury, or
even death.
Before operations, remove conductive objects such as watches, bracelets, bangles,
rings, and necklaces to prevent electric shocks.
During operations, use dedicated insulated tools to prevent electric shocks or short
circuits. The dielectric withstanding voltage level must comply with local laws,
regulations, standards, and specifications.
During operations, wear personal protective equipment such as protective
clothing, insulated boots, safety helmets with face shields, and insulated gloves.
Issue 02 (2023-09-30)
Damage caused during transportation by the customer or a third party
authorized by the customer
Storage conditions that do not meet the requirements specified in this
document
Failure to comply with local laws, regulations, and related standards due to
the materials and tools prepared by the customer
Damage caused by the customer's negligence or improper operations or third-
party reasons
Defects, malfunctions or damage caused by acts, events, negligence, or
accidents beyond the Company's reasonable control, including power outages
or electrical failures, theft, wars, riots, civil disturbances, terrorism, and
intentional or malicious damage, etc.
D ANGER
D ANGER
D ANGER
D ANGER
WARNING
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
2