Philips CRYSTAL 650 User Manual page 70

After removal of the device driver and the soft-
6
ware, you must restart your PC. Disconnect the
multifunction machine from the PC before re-
starting. Click on Finish. Do not remove the CD-
ROM from the CD-ROM drive until after the re-
start.
²
You can also restart the PC at a later time
to allow you to continue working with other
open programs or save unsaved data.
Uninstalling via the Start
Menu
You can also uninstall Companion Suite IH without
using the CD-ROM. Close all open programs and ap-
plications before beginning the removal process.
Variant 1
Click on Start > Programs > Companion
Suite > Companion Suite IH > Uninstall on
the PC.
You can either repair the device driver or remove it. Se-
lect Remove and click on Next.
You will be asked to confirm the uninstall. After you
have clicked on OK, Companion Suite IH will be re-
moved from your PC. At the conclusion of the uninstall
process you must restart your PC. Disconnect the
multifunction machine from the PC before restart-
ing.
²
The programs Photo Impression and Paper
Port are not deleted and remain available for
use.
70
Variant 2
Click on Start > Settings > Control Panel >
Add or Remove Programs to view which pro-
grams are installed on the PC.
1 Click on the program that you would like to delete
and select Change/Remove.
Follow the further instructions on the PC screen to
2
delete the selected program from the hard drive of
your PC.
4. Uninstalling the Driver and Software