Advertisement
TOSHIBA Industrial Magnetron E3327
Fig. 4 Optimum filament voltage
vs. Average anode current
5
4
+0.2V
max
3
2
-0.2V
min
1
0
0
400
Average anode current (mA)
note) Information in this document is subject to change without notice.
800
1200
Fig. 5 Performance Chart
Operating conditions :
Power supply :
Three phase full wave rectified
with choke coil to suppress
the peak anode current.
Filament voltage :
In accordance with Fig. 4
Load VSWR : 2.5
Load VSWR phase : SINK
This is measured within 15 sec
after applying the anode voltage.
© 2021 Toshiba Hokuto Electronics Corporation
Rev. 20211217
7
Advertisement
