Advertisement
TOSHIBA Industrial Magnetron E3327
Fig. 1
I mag
ctromagnet
Ef
(Filament
ebm
(Peak
anode
Ib
(Average
anode
note) Information in this document is subject to change without notice.
+
Note (1) I-mag should be set 4.0 A just before
ebm is applied. However, it is not good
to run the tube electromagnet always
with Imag of 4.0A because of the
temperature rise of it.
(2) Ef should be reduced from 5.0 ± 0.2 V
to 4.0 ± 0.2 V just before ebm is applied.
(3) Time controlling of 50 ms and 200 ms in
Fig. 1 are important for assuring normal
oscillation starting of E3327.
© 2021 Toshiba Hokuto Electronics Corporation
5
Rev. 20211217
Advertisement
