Testing Charger Recognition - Motorola MXP600 Manual

MN006362A01-AL
Chapter 4 : Test Setup and Testing
Bluetooth Test
55 The display shows:
Bluetooth
Test
56 Do the following:
Action
Press any key.
Wait for result.
Press any key to continue.
Press any key to continue.
Speak into the internal mi-
crophone.
Press any key to continue.
Speak into the paired Blue-
tooth microphone.
57 Press the corresponding key to proceed to the next test.
The display shows:
The test is
completed.
Press any key
to turn the
radio OFF.
Test is completed. Press any key to turn the radio OFF.
Postrequisites: For WiFi, use the radio feature user guide for WiFi setup and WiFi communication
test.
NOTE: WiFi is not supported for customer.
4.12.2

Testing Charger Recognition

Procedure:
1 Turn the radio ON.
2 Connect the Rapid Travel Charger accessory connector to the handset. Check the following:
• LCD display shows charger connected.
• A beep is heard.
• Keypad back-light is turned ON.
• Charging icon is shown.
54
Result
The display shows:
BT test - pairing
WAIT !!!
The display shows pairing test result.
The display shows pairing connection test result.
The display shows:
BT microphone
test - start
You hear yourself in the paired Bluetooth audio speaker.
The display shows:
BT speaker
test - start
You hear yourself in the internal speaker.