Yamaha K-1020 Owner's Manual page 3

1 3 Nonuse Period—The power cord of the appliance
should be unplugged from the outlet when left unused for a long
period of time.
ман нн
that objects do not fall into and liquids not spilled into the inside
of the appliance.
1 am Damage Requiring Service— The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits
a marked change in performance; or
E. The appliance has been dropped, or the cabinet damaged.
"| Б Servicing—The user should not attempt to service the
appliance beyond those means described in the operating instruc-
tions. All other servicing should be referred to qualified service.
personnel.
1
The К-1020 is a sophisticated stereo cassette tape deck. To ensure
proper operation for the best possible performance, please read this
manual carefully.
2
Choose the installation location of your K-1020. |
Avoid placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibration and excessive dust, heat, cold or
moisture. Keep it away from such sources of hum as. transformers
or motors. |
3
Do not open the cabinet as this might result in damage to the
set or electrical shock. If a foreign object should get into the set,
contact your dealer.
4
When removing the power plug from the wall outlet, always pull
directly on the plug; never yank the cord.
5
Do not use force when using the switches and knobs.
6
if the K-1020 gets wet (from spilled liquids, rain, etc.) immediately
pull out the plug; contact your dealer. | |
7
Do not attempt to clean the K-1020 with chemical solvents as this
might damage the finish.
Use a clean, dry cloth.
8
The recording/playback head used in this cassette tape deck is а
Pure Sendust alloy head, with inherently high signal-to-noise ratio
and excellent recording distortion characteristics, but it can become
dirty through the use of old tapes or from dust. This can have a
disastrous effect on quality: clean the heads regularly with one of
the commonly available cleaning tapes or other cleaning device.
9
The К-1020 is compatible with metal tapes. Use either Normal (LH),
CrO: (Chrome), or Metal tapes. |
After putting a cassette back into its case, store in a location away
from exposure to direct sunlight, humidity, high temperatures, and
magnetic fields (away from television sets, speakers, etc.). High
temperatures and humidity will damage the tape itself, while ex-
posure to magnetic fields may cuase a loss of recorded material. :
11
Be sure to read the "troubleshooting" section for advice on com-
mon operating errors before concluding that your K-1020 is faulty.
{=
Keep this manual in a safe place for future reference.