Yamaha K-1020 Owner's Manual page 12

Natural sound stereo cassette deck
Hide thumbs Also See for K-1020:
Table of Contents

Advertisement

11
Setting the level recording is an important point for proper record-
ing. The PEAK METER of this cassette tape deck is equipped with
an optimum recording level monitor function, simplifying the process
of setting the level. The optimum level indicator will automatically
change position according to the type of tape being used and the
noise reduction system selected. Consequently, setting the optimum
recording level is an accurate and simple operation, enabling the
full dynamic range of the tape to be exploited.
e When using the NR OFF or DOLBY NR B, and C position,
Dot indicator
and normal or chrome tape.
:
The optimum recording level will be displayed
Leer
ТИИСТИСИН
PEAK/dB
—99 30 ose
20 «m 16 «и 12 н
10 iem 8 enm 6 ни 4 ТТ 2 шн
0 un 2 DD 4 uw bod 8
10
12
14
eer
{ШИШИШИ
Set іле REC LEVEL so that momentary signal peaks reach the +6 dB level.
16
20 +
е When using the NR OFF or DOLBY
NR B, and С positions,
and metal tape.
LEFT
ПІШІП
РЕАК/4В — 99 30e 20 и 16 өн 12 ши [0 он 8 нит
бен шш Zo Qn 2004 та un
ер 12 14 16 20 +
mer
ТЕТИККЕ
Set the REC LEVEL so that momentary signal peaks reach the +8 ОВ level.
* When using dbx, and normal, crome or metai tape.
LEFT
AALAN
LEA
ATRN
РЕАК/48 — 99 30 мин 20 m 16 за Dm Д0 wem 8 iem бен 4 њи ми Qum 2004 өн бт
Bd 2
ом 16620 +
meer
AEAN
Set the REC LEVEL so that momentary signal peaks reach the +16 dB level.
FADE IN will cause the recording level to gradually increase to
the pre-set level, and FADE OUT will cause the recording leve! to
gradually decrease from the pre-set level. Both functions can be
controlled as desired. Using these functions to commence recording
during a selection or for the gradual fading out of a selection will
lend a distinctly professional touch to your recordings.
• Fade-in recording
Set the MASTER FADER knob to — œ. After the iocari ding starts,
gradually raise the control setting to the @ position.
• Fade-out recording
|
Gradually lower the MASTER FADER control setting to the — оо
position, and then stop the recording.
|
Recording level set -
bs |
|
Gradually raise
Gradually lower
NOTE: The fade-in and fade-out features will not function during the
PLAY mode. These functions will operate only during the
RECORD mode.

Advertisement

Table of Contents
loading

Table of Contents